![]() ![]() ![]() |
|
![]() |
||||||||||
仪器简介 Description: 单根电线电缆燃烧测试仪用于测试电线电缆在过热、过流等非正常状态下,其绝缘层的阻燃性能。应用于线电缆或光缆的垂直火焰蔓延测试,同时可检验在火焰条件下滴露物的燃烧状况。 Single cable combustion Tester isused to test wires and cables in heat, flow under abnormal conditions, such as,the insulating layer of fire-retardant properties. Vertical flame spread testfor cables or fiber-optic cable, also can be tested under fire conditions ofdettol combustion.
注:试验箱门为装饰及防尘作用。根据标准要求,实验时需敞开。 Note: the test box and dust for thedoor. According to the standard requirements, the door should be open whentesting. 符合标准 Standard: IEC 60332-1-1、2、3;EN 50086-1-1994 GBT18380.11,12-2008 (被替代版本GB/T 12666.2/ GBT 18380.1-2001)型号 Model:TTech-GBT18380A 主要特点Main features: 1、 触摸屏智能控制系统;中英文操作界面 Touch-screen control system/English operation interface(optional) 2、 系统自动点火,自动计时,数据自动存储; The systemauto-ignition, automatic timing, automatic data storage and are free to printtest report; 3、 试验部分和控制部分组成采用一体化设计,方便现场安装和调试。 Test and controlcomponents using integrated design, convenient installation and debugging. 4、 全不锈钢箱体,内部腔体高度为1200mm,宽度300mm,深度为450mm; Stainless steelCabinet, internal Chamber height for 1200mm, width 300mm mm, depth of 450mm; 5、 两根不锈钢钢杆,穿孔加螺栓固定单根电线电缆或光缆试样; Two stainless-steelrod, perforation and bolted on a single wire cables or cables sample; 6、 燃烧器为预混合型,内径为¢12±0.5mm,长约100mm。1KW混合型标准燃烧器,可提供精准测试火源;控制箱配备压力表、减压阀、转子流量计及切断球阀; Burner for premixedtype, diameter DIA 12 ± 0.5mm, CA 100mm. 1KW standard burnerhybrid, can provide accurate test fire; the control box is equipped withpressure gauge, pressure relief valve, rotor flowmeter and cuts off the ballvalve; 7、 控制箱体内部配备气体单向阀,提供更多的安全保证; The gases inside thecontrol box is equipped with a one-way valve, provide more security assurances; 8、 火焰施加时间及持燃时间可在0~99分99秒范围内调节。试验过程自动控制。 Flame flameapplication time and hold time can be adjusted in the range of 0~99 and 99seconds. Test process automation. 9、 针阀精确调节火焰高度,按标准要求蓝色火焰50mm~60mm, 总高170mm~190mm Needle valve adjustflame height, required by the standard blue flame 50mm~60mm, total height170mm~190mm 10、 针阀控制气体流量:丙烷650ml/min ±30ml/min;空气10L/min±0.5ml/min. Inlet needle valvecontrolling gas flow: ± 30mL/min propane 650ml/min air 10L/min± 0.5ml/min. 11、 气体压力表及调压阀,精确控制气体压力; Imported brands ofgas pressure gauges and pressure regulator, precise control of air pressure; 12、 配有火焰高度卡尺。 flame height gauges 13、 带燃气流量计及压力调节;自动点火。 With gas flow meter and pressure control; automatic ignition. 规格
单根垂直燃烧测试标准差异 本差异比较涉及一下标准: ——GB/T 18380.11-2008 电缆和光缆在火焰条件下的燃烧试验第11部分(IEC 60332-1-1:2004) 以下简称标准11 ——GB/T 18380.12-2008 电缆和光缆在火焰条件下的燃烧试验第12部分(IEC 60332-1-2:2004) 以下简称标准12 ——GB/T 18380.13-2008 电缆和光缆在火焰条件下的燃烧试验第12部分(IEC 60332-1-3:2004) 以下简称标准13 ——GB/T 18380.21-2008 电缆和光缆在火焰条件下的燃烧试验第12部分(IEC 60332-2-1:2004) 以下简称标准21 ——GB/T 18380.22-2008 电缆和光缆在火焰条件下的燃烧试验第12部分(IEC 60332-2-2:2004) 以下简称标准22 ——GB/T 5169.147-2007 电工电子着火危险试验第14部分(IEC 60695-11-2:2003)
标准11、标准12和标准13所用设备相同。 标准22和标准23所用设备相同。 标准11所用引燃源为《电工电子着火危险试验》第14部分所规定引燃源。 |
产品评论: |
|
|
版权所有:苏州泰思泰克检测仪器科技有限公司 苏ICP备13030412号